VoiceTronix - OpenLog

PRODUCTS

OPENLOG4 Hi-Z PCI CARD

Pricing | Features and Benefits | Typical Configurations | Product Specifications

Our OpenLog4 card offers a highly integrated hardware solution, that combines high impedance line isolation and a DSP processor on a single half length PCI card. The card is specifically targeted for developers of PC based Call Logging/Recording systems that run under Linux or Windows.

Voicetronix understands the advantages in decreasing application development time and minimising the time to market of end-user solutions for its stakeholders. Our OpenLog cards support a free commercial grade Open Source Voice Logger application that enables users to quickly customise and deploy Call Logging/Recording applications for a fraction of the price of commercially available Logging solutions.

All you need is a PC, an OpenLog card and the Voice Logger software to build your own multi-port Call Logging/Recording system.

Typical environments for Call Logging/Recording applications include:

The finance and banking industry where calls are recorded to verify transaction dealings.
Call centres and help desks that monitor calls to be used as customer service training aids.
Emergency response services where calls answered are often life threatening in nature.
Corrective institutions that monitor calls for illegal activities.
Dictation services for Legal and Medical practitioners.

NOTE: This card is only recommended for existing customers and telephony solutions running under Windows. For new customers wishing to develop their telephony solutions under Linux, we recommends the OpenPCI series as a far superior alternative.

The following table summarises the main aspects of the hardware:

Product	Port number	Telephony Interface	Image	Connects To
OpenLog4	4	High Impedance (Hi-Z) via jumper settings		POTS lines and legacy PBX extensions for call logging/monitoring purposes.

FEATURES

BENEFITS

Half length PCI (5V) form factor.	Can be only installed now in a limited range of motherboards and chassis sizes.
Supports Linux and Windows operating systems.	Windows based developers can leverage off our open source development tools to build their next Call recording application much the same way as Linux based developers.
Configurable recording triggers (ie. Line voltage, VOX, DTMF, programmable tones).	Faciltates recording of calls on most equipment and lines except through proprietary digital handsets found in keyed telephone systems (KTS).
Open Source Software Development Tools and Logger application software.	Speeds up development, provides total design and maintenance control and eliminates vendor lock-in, all at zero cost! Our open source API supports both synchronous and asynchronous programming models. Typical commercially available Call Logging solutions cost around US$1000/channel. For the price of a PC/server and an OpenLog4 card, you can deploy a commercial grade Call Logging/Recording system for a fraction of the price. Check out the free LGPL-licensed Voice Logger software for more feature information!
Automatic gain control (AGC).	Enables both parties (far-end and near-end) to be recorded at comparable volume levels. Without AGC the far-end caller signal level is usually much lower than the near-end caller signal level.
Programmable software gain.	It extends the recording range of the telephony hardware - suitable for line conditions that exhibit very low or high signal levels.

TYPICAL CONFIGURATIONS

Providing call logging/monitoring functionality to existing phone systems. Take a PC/server with the OpenLog4 card running Linux and tap the card's ports to the telco trunk lines (PSTN) if only incoming and outgoing calls need to be monitored. If inter-office calls are also required to be monitored, then tap the PBX extensions instead of the trunk lines. Install, configure and run our hardware driver & Logger application software. Note: Only the tapping of standard analogue handsets is supported. Digital handsets found in keyed telephone systems (KTS) cannot be tapped using our technology.

PRODUCT SPECIFICATIONS

Minimum System Requirements
CPU/Speed		Pentium IV or equivalent - 1GHz or greater.
Memory(RAM)		512MB or greater.
MOBO/Backplane		Supporting 5V Power supply, PCI 2.0 bus.
Operating System		Linux & Windows XP.
Technical Specifications
Maximum board per system		System dependent - on the number of PCI slots available on the PC chassis.
Operating Temperature		0 to 50C.
Form Factor		Half length PCI.
On Board Processor		TMS320BC52-100.
Power Requirements		450mA @ 5V.
Telephony interface
Number of Ports		4
Port Types		High Impedance (Hi-Z)
Phyiscal connection		4 x RJ11 sockets.
Trunk Mode		Pick off >15K Ohms.
Cross-talk coupling		<-60dB.
Recording Triggers
Line Voltage dectection		Software configurable.
VOX Detection		Software configurable.
DTMF Detection		0-9, *, #, A, B, C, D.
Programmable tone Detection		Software configurable.
Audio Signal
Sampling		8 bit companded ADC-DAC sampling @ 8kHz.
Frequency Response		300Hz - 3400Hz.
Receive Gain		Software configurable (12dB to -12dB).
Signal Processing - On TMS320BC52-100
Audio codecs		Mu-law, A-law, 16 bit signed Linear.
DTMF Detector		0-9, *, #, A, B, C, D.
Tone Detector		Software programmable - suitable for call progress tones.
Signal Processing - On Host PC/Server
FSK Detector		Caller ID Type I & II V.23 & Bell 202
Safety & Certifications
Telecom and EMI Approvals		USA (FCC), Europe, Australia & New Zealand.
Open Source Software Supported
Software Development Kit (SDK) under Linux		VPB API 4.2.x, VPB utlities.
Software Development Kit (SDK) under Windows		VPB API 2.4.3.
Application software under Linux		L-GPL Logger.